pre-release Fresh R2 не видит PS/2 клавиатуру

[doslid]

Доброго дня всем!
Вчера попытался запустить сабж на домашнем ПК. Все бы хорошо, но система после загрузки с лайвДВД в упор не видит мою клавиатуру Sven Slim 303, на нажатия клавиш не реагирует вообще. Мышь работает нормально. В других дистрибутивах такого не наблюдалось. В чем может быть проблема? Подскажите, пожалуйста!

[akdengi]

Не видит после захода в KDE или уже на этапе, когда просит выбрать таймзону и т.п.?

[doslid]

В КДЕ не видит точно. На этапе выбора не знаю - я тыкал все мышкой.

[doslid]

Клавиатура не видна уже на этапе выбора таймзоны и др. В КДЕ не работает наглухо. В то же время в ВиртуалБоксе все работает норм. Загадка...

[akdengi]

Пока только посоветовать переходник на USB или USB клавиатуру. У меня увы с ps/2 не воспроизводится. В Live режиме тоже не пашет?

[doslid]

Все это как раз в лайв режиме и происходит. Установиться на ЖД без клавиатуры невозможно.

[akdengi]

А в обычном? Или EFI система?

[Pulfer]

Клавиатура не видна уже на этапе выбора таймзоны и др. В КДЕ не работает наглухо. В то же время в ВиртуалБоксе все работает норм. Загадка...

Да нет, загадки тут нет - в VirtualBox железо эмулируется, поэтому "железные" проблемы там и не вылазят.

Что касается самой проблемы, то тоже затрудняюсь сходу понять, что это может быть. PS/2 же такая стандартная вещь, что вообще не ясно, как может такая клава отваливаться, что может быть.

[doslid]

Нет, не EFI. Проверить в установленной системе не могу, т.к. не могу установиться без клавиатуры(

[akdengi]

Нет, не EFI. Проверить в установленной системе не могу, т.к. не могу установиться без клавиатуры(

Если выбрать режим установки, то все поставится (там клавиатура и не нужна, только мышка), а после перезагрузки возможно клавиатуру подхватит (был такой баг в параллельной теме). Почему вышибло тоже непонятно - пока только два человека (вместе с вами) воспроизвели, и то у второго после установки и перезагрузки все заработало.

[StanislavM]

У меня на ноутбуке Lenovo Z565 всё так же с клавиатурой. Так это финальные образы R2 или нет?

[Pulfer]

У меня на ноутбуке Lenovo Z565 всё так же с клавиатурой. Так это финальные образы R2 или нет?

Финальные, да. Но может будут ещё доп. образы с другим ядром или чем-то ещё, если получится воспроизвести проблему с клавиатурами и найти решение.

[akdengi]

А в BIOS стоит включенной поддержка Legacy USB?

[akdengi]

И попробуйте добавить в параметры загрузки ядра

noapic acpi=off

[StanislavM]

Короче я поставил эту ROSу, в конце установки клавиатура уже работала, после перезагрузки тоже все вроде работает, пишу с неё.

[akdengi]

Короче я поставил эту ROSу, в конце установки клавиатура уже работала, после перезагрузки тоже все вроде работает, пишу с неё.

Мы рады, просто самим интересно почему глюкнуло при установке и как это воспроизвести

[keleg]

По идее нужно в грубе дефолтовым выбором сделать установку. Именно для таких случаев.

[Галахов Роман]

Тоже происходит и в XP (глючит контроллер) http://forum.ixbt.com/post.cgi?id=print:9:56009. Может наведет на какие-то мысли по решению проблемы?

[akdengi]

Тоже происходит и в XP (глючит контроллер) http://forum.ixbt.com/post.cgi?id=print:9:56009. Может наведет на какие-то мысли по решению проблемы?

Подозрения у меня уже есть на что, проверить надо. Вопрос как раз в том, что оборудования на котором глючит, под рукой нету.

[ans]

Подозрения у меня уже есть на что, проверить надо. Вопрос как раз в том, что оборудования на котором глючит, под рукой нету.

Могу только модель материнки сказать, где клавиатура ps/2 при установке не работает:
Manufacturer: ASUSTeK Computer INC.
Product Name: P5GC-MX/1333

Или по почте выслать?

[akdengi]

Лучше lspci полный вывод и lspcidrake с lsusb - поможет разобраться.

[doslid]

загрузился с установочного диска не в режиме liveCD, а в режиме установки - клавиатура работает! причем установка не начинается сразу, а загружает КДЕ, а оттуда уже надо запускать лайв-установщик. так должно быть?)

[doslid]

noapic acpi=off не помог, кстати.

[akdengi]

загрузился с установочного диска не в режиме liveCD, а в режиме установки - клавиатура работает! причем установка не начинается сразу, а загружает КДЕ, а оттуда уже надо запускать лайв-установщик. так должно быть?)

Вот это уже показывает странность. Вы чем писали образ? И откуда его качали?

[doslid]

качал по торрент-ссылке, которую вчера выложили на линукс.орг.ру. писал образ под виндой, программа Ashampoo Burning Studio 6 FREE.

[akdengi]

Попробуйте записать через http://cdn.2safe.com/564936033559/RosaI ... .1-win.zip

[doslid]

Загрузился с образа на домашнем ПК. Пока не повключал все возможные настройки ЮСБ в БИОСе, система клавиатуру не увидела. Но после включения все заработало, система установилась, работает норм.
Возник новый вопрос - НетворкМенеджер видит мой 3G модем, но не коннектит. КРРР видит и соединяет без вопросов. Как завести НМ?

[akdengi]

Загрузился с образа на домашнем ПК. Пока не повключал все возможные настройки ЮСБ в БИОСе, система клавиатуру не увидела. Но после включения все заработало, система установилась, работает норм.
Возник новый вопрос - НетворкМенеджер видит мой 3G модем, но не коннектит. КРРР видит и соединяет без вопросов. Как завести НМ?

А он может и не завестись, если у вас Мегафоновский к примеру, которые каждые 20 секунд разрывает сессию. Тут только kppp

[doslid]

Однако, тот же модем под R1 опознавался НМ и работал без проблем.

[akdengi]

Однако, тот же модем под R1 опознавался НМ и работал без проблем.

Тогда нужно подключить модем, попробовать соединиться и дать сюда вывод dmesg, syslog и journalctl.

Сказать "почему" тут достаточно сложно без логов.

[Галахов Роман]

Модем Мегафон Е392 у меня прекрасно работает с NM. R1 обновленная до R2.
Единственное, по советам на форумах в консоли включаю пинг, чтобы была постоянная передача данных и вышка не снижала приоритет по бездействию модема.

[doslid]

lsusb

[user@user-desktop ~]$ lsusb -v

Bus 001 Device 003: ID 12d1:140c Huawei Technologies Co., Ltd. E180v
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x12d1 Huawei Technologies Co., Ltd.
idProduct 0x140c E180v
bcdDevice 0.00
iManufacturer 1
iProduct 2
iSerial 4
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 138
bNumInterfaces 5
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 3
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 128
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 3
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 8
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 3
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 3
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 4
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x08 EP 8 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0

Bus 002 Device 003: ID 0ac8:3450 Z-Star Microelectronics Corp.
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x0ac8 Z-Star Microelectronics Corp.
idProduct 0x3450
bcdDevice 1.a2
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 481
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 320mA
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 0
bInterfaceCount 2
bFunctionClass 14 Video
bFunctionSubClass 3 Video Interface Collection
bFunctionProtocol 0
iFunction 2
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 1 Video Control
bInterfaceProtocol 0
iInterface 2
VideoControl Interface Descriptor:
bLength 13
bDescriptorType 36
bDescriptorSubtype 1 (HEADER)
bcdUVC 1.00
wTotalLength 79
dwClockFrequency 30.000000MHz
bInCollection 1
baInterfaceNr( 0) 1
VideoControl Interface Descriptor:
bLength 18
bDescriptorType 36
bDescriptorSubtype 2 (INPUT_TERMINAL)
bTerminalID 1
wTerminalType 0x0201 Camera Sensor
bAssocTerminal 0
iTerminal 0
wObjectiveFocalLengthMin 0
wObjectiveFocalLengthMax 0
wOcularFocalLength 0
bControlSize 3
bmControls 0x0002002a
Auto-Exposure Mode
Exposure Time (Absolute)
Focus (Absolute)
Focus, Auto
VideoControl Interface Descriptor:
bLength 11
bDescriptorType 36
bDescriptorSubtype 5 (PROCESSING_UNIT)
Warning: Descriptor too short
bUnitID 2
bSourceID 1
wMaxMultiplier 0
bControlSize 2
bmControls 0x0000177b
Brightness
Contrast
Saturation
Sharpness
Gamma
White Balance Temperature
Backlight Compensation
Gain
Power Line Frequency
White Balance Temperature, Auto
iProcessing 0
bmVideoStandards 0x 9
None
SECAM - 625/50
VideoControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 3 (OUTPUT_TERMINAL)
bTerminalID 3
wTerminalType 0x0101 USB Streaming
bAssocTerminal 0
bSourceID 2
iTerminal 0
VideoControl Interface Descriptor:
bLength 28
bDescriptorType 36
bDescriptorSubtype 6 (EXTENSION_UNIT)
bUnitID 4
guidExtensionCode {5dc717a9-1941-da11-ae0e-000d56ac7b4c}
bNumControl 8
bNrPins 1
baSourceID( 0) 1
bControlSize 3
bmControls( 0) 0x59
bmControls( 1) 0x80
bmControls( 2) 0x80
iExtension 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 5
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
VideoStreaming Interface Descriptor:
bLength 14
bDescriptorType 36
bDescriptorSubtype 1 (INPUT_HEADER)
bNumFormats 1
wTotalLength 243
bEndPointAddress 130
bmInfo 0
bTerminalLink 3
bStillCaptureMethod 2
bTriggerSupport 1
bTriggerUsage 1
bControlSize 1
bmaControls( 0) 27
VideoStreaming Interface Descriptor:
bLength 27
bDescriptorType 36
bDescriptorSubtype 4 (FORMAT_UNCOMPRESSED)
bFormatIndex 1
bNumFrameDescriptors 5
guidFormat {59555932-0000-1000-8000-00aa00389b71}
bBitsPerPixel 16
bDefaultFrameIndex 1
bAspectRatioX 0
bAspectRatioY 0
bmInterlaceFlags 0x00
Interlaced stream or variable: No
Fields per frame: 2 fields
Field 1 first: No
Field pattern: Field 1 only
bCopyProtect 0
VideoStreaming Interface Descriptor:
bLength 34
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 1
bmCapabilities 0x00
Still image unsupported
wWidth 640
wHeight 480
dwMinBitRate 768000
dwMaxBitRate 196608000
dwMaxVideoFrameBufferSize 614400
dwDefaultFrameInterval 333333
bFrameIntervalType 2
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666667
VideoStreaming Interface Descriptor:
bLength 34
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 2
bmCapabilities 0x00
Still image unsupported
wWidth 352
wHeight 288
dwMinBitRate 768000
dwMaxBitRate 196608000
dwMaxVideoFrameBufferSize 202752
dwDefaultFrameInterval 333333
bFrameIntervalType 2
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666667
VideoStreaming Interface Descriptor:
bLength 34
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 3
bmCapabilities 0x00
Still image unsupported
wWidth 320
wHeight 240
dwMinBitRate 768000
dwMaxBitRate 196608000
dwMaxVideoFrameBufferSize 153600
dwDefaultFrameInterval 333333
bFrameIntervalType 2
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666667
VideoStreaming Interface Descriptor:
bLength 34
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 4
bmCapabilities 0x00
Still image unsupported
wWidth 176
wHeight 144
dwMinBitRate 768000
dwMaxBitRate 196608000
dwMaxVideoFrameBufferSize 50688
dwDefaultFrameInterval 333333
bFrameIntervalType 2
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666667
VideoStreaming Interface Descriptor:
bLength 34
bDescriptorType 36
bDescriptorSubtype 5 (FRAME_UNCOMPRESSED)
bFrameIndex 5
bmCapabilities 0x00
Still image unsupported
wWidth 160
wHeight 120
dwMinBitRate 768000
dwMaxBitRate 196608000
dwMaxVideoFrameBufferSize 38400
dwDefaultFrameInterval 333333
bFrameIntervalType 2
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666667
VideoStreaming Interface Descriptor:
bLength 26
bDescriptorType 36
bDescriptorSubtype 3 (STILL_IMAGE_FRAME)
bEndpointAddress 0
bNumImageSizePatterns 5
wWidth( 0) 640
wHeight( 0) 480
wWidth( 1) 352
wHeight( 1) 288
wWidth( 2) 320
wHeight( 2) 240
wWidth( 3) 176
wHeight( 3) 144
wWidth( 4) 160
wHeight( 4) 120
bNumCompressionPatterns 5
VideoStreaming Interface Descriptor:
bLength 6
bDescriptorType 36
bDescriptorSubtype 13 (COLORFORMAT)
bColorPrimaries 0 (Unspecified)
bTransferCharacteristics 0 (Unspecified)
bMatrixCoefficients 0 (Unspecified)
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0080 1x 128 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 3
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 4
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0b00 2x 768 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 5
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0c00 2x 1024 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 6
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x1380 3x 896 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 7
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x1400 3x 1024 bytes
bInterval 1

Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.10
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.10
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12

dmesg

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.19-nrj-desktop-2rosa (mockbuild@cooker-base) (gcc version 4.7.3 20121001 (ROSA) (Linaro GCC 4.7-2012.10) ) #1 SMP PREEMPT Wed Nov 27 12:49:09 UTC 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.10.19-nrj-desktop-2rosa root=UUID=77ff1831-4695-4cb4-8617-0e77ed1f6fff ro splash=silent logo.nologo resume=/dev/sda5 init=/lib/systemd/systemd
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffa0000-0x00000000bffaffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bffb0000-0x00000000bffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./N68C-GS FX, BIOS P1.00 01/18/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x12f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000012f000000 aka 4848M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbffa0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01eea000, 0x01eeafff] PGTABLE
[ 0.000000] BRK [0x01eeb000, 0x01eebfff] PGTABLE
[ 0.000000] BRK [0x01eec000, 0x01eecfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12ee00000-0x12effffff]
[ 0.000000] [mem 0x12ee00000-0x12effffff] page 2M
[ 0.000000] BRK [0x01eed000, 0x01eedfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12c000000-0x12edfffff]
[ 0.000000] [mem 0x12c000000-0x12edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x12bffffff]
[ 0.000000] [mem 0x100000000-0x12bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbff9ffff] page 4k
[ 0.000000] RAMDISK: [mem 0x35ea2000-0x36f48fff]
[ 0.000000] ACPI: RSDP 00000000000fbf20 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000bffa0000 00040 (v01 011812 RSDT1201 20120118 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bffa0200 00084 (v01 A_M_I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bffa0470 04D0C (v01 AS626 AS626013 00000013 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bffb0000 00040
[ 0.000000] ACPI: APIC 00000000bffa0390 000A0 (v01 011812 APIC1201 20120118 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bffa0430 0003C (v01 011812 OEMMCFG 20120118 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bffb0040 00072 (v01 011812 OEMB1201 20120118 MSFT 00000097)
[ 0.000000] ACPI: AAFT 00000000bffaa470 0002E (v01 011812 OEMAAFT 20120118 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bffaa4a0 00038 (v01 011812 OEMHPET0 20120118 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bffaa4e0 00B9C (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12effffff]
[ 0.000000] NODE_DATA [mem 0x12effa000-0x12effdfff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012aa00000-ffff88012e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x12effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbff9ffff]
[ 0.000000] node 0: [mem 0x100000000-0x12effffff]
[ 0.000000] On node 0 totalpages: 978750
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12223 pages used for memmap
[ 0.000000] DMA32 zone: 782240 pages, LIFO batch:31
[ 0.000000] Normal zone: 3008 pages used for memmap
[ 0.000000] Normal zone: 192512 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x14] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 20, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bffa0000 - 00000000bffb0000
[ 0.000000] PM: Registered nosave memory: 00000000bffb0000 - 00000000bffe0000
[ 0.000000] PM: Registered nosave memory: 00000000bffe0000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] e820: [mem 0xc0000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012ec00000 s85376 r8192 d21120 u262144
[ 0.000000] pcpu-alloc: s85376 r8192 d21120 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 963434
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10.19-nrj-desktop-2rosa root=UUID=77ff1831-4695-4cb4-8617-0e77ed1f6fff ro splash=silent logo.nologo resume=/dev/sda5 init=/lib/systemd/systemd
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 0 size 32 MB
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
[ 0.000000] Memory: 3688372k/4964352k available (6276k kernel code, 1049352k absent, 226628k reserved, 6846k data, 1208k init)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.001000] tsc: Detected 3616.027 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 7232.05 BogoMIPS (lpj=3616027)
[ 0.000009] pid_max: default: 32768 minimum: 301
[ 0.000034] Security Framework initialized
[ 0.000045] TOMOYO Linux initialized
[ 0.000311] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001372] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001836] Mount-cache hash table entries: 256
[ 0.002004] Initializing cgroup subsys devices
[ 0.002008] Initializing cgroup subsys freezer
[ 0.002011] Initializing cgroup subsys net_cls
[ 0.002014] Initializing cgroup subsys blkio
[ 0.002017] Initializing cgroup subsys bfqio
[ 0.002039] tseg: 0000000000
[ 0.002044] CPU: Physical Processor ID: 0
[ 0.002047] CPU: Processor Core ID: 0
[ 0.002050] mce: CPU supports 7 MCE banks
[ 0.002058] LVT offset 1 assigned for vector 0xf9
[ 0.002065] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
[ 0.002158] Freeing SMP alternatives: 20k freed
[ 0.002801] ACPI: Core revision 20130328
[ 0.004667] ACPI: All ACPI Tables successfully acquired
[ 0.005190] ftrace: allocating 22853 entries in 90 pages
[ 0.013868] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.023869] smpboot: CPU0: AMD FX(tm)-4100 Quad-Core Processor (fam: 15, model: 01, stepping: 02)
[ 0.125085] Performance Events:
[ 0.125088] perf: AMD core performance counters detected
[ 0.125094] AMD PMU driver.
[ 0.125098] ... version: 0
[ 0.125102] ... bit width: 48
[ 0.125106] ... generic registers: 6
[ 0.125109] ... value mask: 0000ffffffffffff
[ 0.125114] ... max period: 00007fffffffffff
[ 0.125118] ... fixed-purpose events: 0
[ 0.125122] ... event mask: 000000000000003f
[ 0.132147] MCE: In-kernel MCE decoding enabled.
[ 0.134129] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.177233] Brought up 4 CPUs
[ 0.177240] smpboot: Total of 4 processors activated (28928.21 BogoMIPS)
[ 0.184130] devtmpfs: initialized
[ 0.185263] PM: Registering ACPI NVS region [mem 0xbffb0000-0xbffdffff] (196608 bytes)
[ 0.186054] xor: automatically using best checksumming function:
[ 0.196028] avx : 10968.000 MB/sec
[ 0.196061] RTC time: 16:30:43, date: 12/09/13
[ 0.196100] NET: Registered protocol family 16
[ 0.196243] ACPI: bus type PCI registered
[ 0.196296] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.196304] PCI: not using MMCONFIG
[ 0.196308] PCI: Using configuration type 1 for base access
[ 0.196313] PCI: Using configuration type 1 for extended access
[ 0.196451] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.196457] mtrr: probably your BIOS does not setup all CPUs.
[ 0.196461] mtrr: corrected configuration.
[ 0.196968] bio: create slab <bio-0> at 0
[ 0.214027] raid6: sse2x1 2695 MB/s
[ 0.231006] raid6: sse2x2 8914 MB/s
[ 0.247994] raid6: sse2x4 11394 MB/s
[ 0.247998] raid6: using algorithm sse2x4 (11394 MB/s)
[ 0.248003] raid6: using ssse3x2 recovery algorithm
[ 0.248058] ACPI: Added _OSI(Module Device)
[ 0.248062] ACPI: Added _OSI(Processor Device)
[ 0.248066] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.248071] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.249028] ACPI: EC: Look up EC in DSDT
[ 0.250127] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.252771] ACPI: Interpreter enabled
[ 0.252783] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
[ 0.252804] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.252808] ACPI: Using IOAPIC for interrupt routing
[ 0.252830] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.253899] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in ACPI motherboard resources
[ 0.259460] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.259548] ACPI: No dock devices found.
[ 0.265539] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.265817] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
[ 0.265845] PCI host bridge to bus 0000:00
[ 0.265850] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.265856] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.265861] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.265867] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.265873] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.265879] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff]
[ 0.265885] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfebfffff]
[ 0.265909] pci 0000:00:00.0: [10de:03e2] type 00 class 0x050000
[ 0.266124] pci 0000:00:01.0: [10de:03e1] type 00 class 0x060100
[ 0.266132] pci 0000:00:01.0: reg 10: [io 0x0900-0x09ff]
[ 0.266212] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
[ 0.266223] pci 0000:00:01.1: reg 10: [io 0x0e00-0x0e3f]
[ 0.266240] pci 0000:00:01.1: reg 20: [io 0x0600-0x063f]
[ 0.266245] pci 0000:00:01.1: reg 24: [io 0x0700-0x073f]
[ 0.266274] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.266311] pci 0000:00:01.1: System wakeup disabled by ACPI
[ 0.266340] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
[ 0.266421] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
[ 0.266430] pci 0000:00:02.0: reg 10: [mem 0xefeff000-0xefefffff]
[ 0.266467] pci 0000:00:02.0: supports D1 D2
[ 0.266468] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.266500] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.266532] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
[ 0.266543] pci 0000:00:02.1: reg 10: [mem 0xefefec00-0xefefecff]
[ 0.266587] pci 0000:00:02.1: supports D1 D2
[ 0.266589] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.266622] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 0.266660] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
[ 0.266724] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.266755] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
[ 0.266766] pci 0000:00:05.0: reg 10: [mem 0xefef8000-0xefefbfff]
[ 0.266811] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.266844] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 0.266880] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
[ 0.266903] pci 0000:00:06.0: reg 20: [io 0xffa0-0xffaf]
[ 0.266974] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
[ 0.266985] pci 0000:00:08.0: reg 10: [io 0xe080-0xe087]
[ 0.266989] pci 0000:00:08.0: reg 14: [io 0xe000-0xe003]
[ 0.266993] pci 0000:00:08.0: reg 18: [io 0xdc00-0xdc07]
[ 0.266998] pci 0000:00:08.0: reg 1c: [io 0xd880-0xd883]
[ 0.267002] pci 0000:00:08.0: reg 20: [io 0xd800-0xd80f]
[ 0.267006] pci 0000:00:08.0: reg 24: [mem 0xefefd000-0xefefdfff]
[ 0.267074] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
[ 0.267082] pci 0000:00:08.1: reg 10: [io 0xd480-0xd487]
[ 0.267087] pci 0000:00:08.1: reg 14: [io 0xd400-0xd403]
[ 0.267091] pci 0000:00:08.1: reg 18: [io 0xd080-0xd087]
[ 0.267095] pci 0000:00:08.1: reg 1c: [io 0xd000-0xd003]
[ 0.267100] pci 0000:00:08.1: reg 20: [io 0xcc00-0xcc0f]
[ 0.267104] pci 0000:00:08.1: reg 24: [mem 0xefefc000-0xefefcfff]
[ 0.267183] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
[ 0.267213] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.267250] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.267282] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
[ 0.267312] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.267346] pci 0000:00:0b.0: System wakeup disabled by ACPI
[ 0.267378] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
[ 0.267408] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.267441] pci 0000:00:0c.0: System wakeup disabled by ACPI
[ 0.267470] pci 0000:00:0d.0: [10de:03d6] type 00 class 0x030000
[ 0.267477] pci 0000:00:0d.0: reg 10: [mem 0xee000000-0xeeffffff]
[ 0.267483] pci 0000:00:0d.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.267488] pci 0000:00:0d.0: reg 1c: [mem 0xed000000-0xedffffff 64bit]
[ 0.267494] pci 0000:00:0d.0: reg 30: [mem 0xefec0000-0xefedffff pref]
[ 0.267563] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[ 0.267618] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[ 0.267673] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[ 0.267726] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[ 0.267782] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[ 0.267838] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[ 0.267935] pci 0000:01:0a.0: [1131:7134] type 00 class 0x048000
[ 0.267948] pci 0000:01:0a.0: reg 10: [mem 0xeffffc00-0xefffffff]
[ 0.268005] pci 0000:01:0a.0: supports D1 D2
[ 0.268045] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.268054] pci 0000:00:04.0: bridge window [mem 0xeff00000-0xefffffff]
[ 0.268057] pci 0000:00:04.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.268059] pci 0000:00:04.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.268061] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.268062] pci 0000:00:04.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.268064] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xefffffff] (subtractive decode)
[ 0.268066] pci 0000:00:04.0: bridge window [mem 0xf8000000-0xfebfffff] (subtractive decode)
[ 0.268096] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.268134] pci 0000:00:0b.0: PCI bridge to [bus 03]
[ 0.268170] pci 0000:00:0c.0: PCI bridge to [bus 04]
[ 0.268305] acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d)
[ 0.268581] acpi PNP0A03:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
[ 0.268588] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.269257] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.269381] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.269506] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10
[ 0.269627] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.269750] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 0.269871] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[ 0.269994] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 0.270115] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[ 0.270238] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[ 0.270361] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[ 0.270482] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[ 0.270605] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[ 0.270730] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *10
[ 0.270859] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 0.270984] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.271108] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 0.271231] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5
[ 0.271365] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.271463] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.271471] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.271507] Found 1 acpi root devices
[ 0.271605] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.271613] vgaarb: loaded
[ 0.271616] vgaarb: bridge control possible 0000:00:0d.0
[ 0.271669] SCSI subsystem initialized
[ 0.271674] ACPI: bus type ATA registered
[ 0.271713] libata version 3.00 loaded.
[ 0.271804] PCI: Using ACPI for IRQ routing
[ 0.275046] PCI: pci_cache_line_size set to 64 bytes
[ 0.275077] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.275079] e820: reserve RAM buffer [mem 0xbffa0000-0xbfffffff]
[ 0.275080] e820: reserve RAM buffer [mem 0x12f000000-0x12fffffff]
[ 0.275155] NetLabel: Initializing
[ 0.275159] NetLabel: domain hash size = 128
[ 0.275163] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.275175] NetLabel: unlabeled traffic allowed by default
[ 0.275205] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.275212] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.277249] Switching to clocksource hpet
[ 0.282522] pnp: PnP ACPI init
[ 0.282533] ACPI: bus type PNP registered
[ 0.282575] pnp 00:00: [dma 4]
[ 0.282593] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.282611] pnp 00:01: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.282639] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.283053] pnp 00:03: [dma 3]
[ 0.283152] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.283585] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.283592] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.283598] system 00:04: [io 0x0580-0x05ff] has been reserved
[ 0.283604] system 00:04: [io 0x0800-0x087f] has been reserved
[ 0.283610] system 00:04: [io 0x0880-0x08ff] has been reserved
[ 0.283615] system 00:04: [io 0x0d00-0x0d7f] has been reserved
[ 0.283621] system 00:04: [io 0x0d80-0x0dff] has been reserved
[ 0.283627] system 00:04: [io 0x1100-0x117f] has been reserved
[ 0.283633] system 00:04: [io 0x1180-0x11ff] has been reserved
[ 0.283639] system 00:04: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 0.283646] system 00:04: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 0.283653] system 00:04: [mem 0x000de000-0x000dffff window] has been reserved
[ 0.283660] system 00:04: [mem 0xfec80000-0xfecfffff] has been reserved
[ 0.283666] system 00:04: [mem 0xfefe0000-0xfefe01ff] has been reserved
[ 0.283673] system 00:04: [mem 0xfefe1000-0xfefe1fff] has been reserved
[ 0.283679] system 00:04: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.283685] system 00:04: [mem 0xffb80000-0xffffffff] could not be reserved
[ 0.283693] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.283806] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.283837] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.283936] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.283943] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.283950] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.283999] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.284059] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.284279] pnp 00:0a: [dma 0 disabled]
[ 0.284326] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.284445] system 00:0b: [io 0x0280-0x028f] has been reserved
[ 0.284451] system 00:0b: [io 0x0290-0x029f] has been reserved
[ 0.284457] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.284521] system 00:0c: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.284528] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.284698] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.284705] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.284712] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.284718] system 00:0d: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.284725] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.284732] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.285013] pnp: PnP ACPI: found 14 devices
[ 0.285017] ACPI: bus type PNP unregistered
[ 0.291434] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.291442] pci 0000:00:04.0: bridge window [mem 0xeff00000-0xefffffff]
[ 0.291451] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.291459] pci 0000:00:0b.0: PCI bridge to [bus 03]
[ 0.291467] pci 0000:00:0c.0: PCI bridge to [bus 04]
[ 0.291478] pci 0000:00:04.0: setting latency timer to 64
[ 0.291485] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.291487] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.291488] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.291490] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.291492] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xefffffff]
[ 0.291493] pci_bus 0000:00: resource 9 [mem 0xf8000000-0xfebfffff]
[ 0.291495] pci_bus 0000:01: resource 1 [mem 0xeff00000-0xefffffff]
[ 0.291497] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.291499] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.291500] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.291502] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.291504] pci_bus 0000:01: resource 8 [mem 0xd0000000-0xefffffff]
[ 0.291505] pci_bus 0000:01: resource 9 [mem 0xf8000000-0xfebfffff]
[ 0.291526] NET: Registered protocol family 2
[ 0.291689] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.291823] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.291921] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.291949] TCP: reno registered
[ 0.291959] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.291981] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.292046] NET: Registered protocol family 1
[ 0.292343] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 0.364572] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 0.364700] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.364752] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.364813] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.364869] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.364931] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.364997] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.365069] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.365078] pci 0000:00:0d.0: Boot video device
[ 0.365091] PCI: CLS 64 bytes, default 64
[ 0.365136] Trying to unpack rootfs image as initramfs...
[ 2.112852] Freeing initrd memory: 17052k freed
[ 2.116985] PCI-DMA: Disabling AGP.
[ 2.117059] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 2.117064] PCI-DMA: using GART IOMMU.
[ 2.117069] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 2.121631] perf: AMD NB counters detected
[ 2.121653] LVT offset 0 assigned for vector 0x400
[ 2.121679] perf: AMD IBS detected (0x000000ff)
[ 2.121833] audit: initializing netlink socket (disabled)
[ 2.121847] type=2000 audit(1386606645.011:1): initialized
[ 2.136868] bounce pool size: 64 pages
[ 2.136880] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.138130] VFS: Disk quotas dquot_6.5.2
[ 2.138169] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.138554] bio: create slab <bio-1> at 1
[ 2.138672] Btrfs loaded
[ 2.138680] msgmni has been set to 7366
[ 2.138969] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.139009] io scheduler noop registered
[ 2.139014] io scheduler deadline registered
[ 2.139039] io scheduler cfq registered
[ 2.139067] io scheduler bfq registered (default)
[ 2.139133] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[ 2.139171] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[ 2.139205] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[ 2.139288] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 2.139293] vesafb: scrolling: redraw
[ 2.139297] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.139444] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90008800000, using 3072k, total 3072k
[ 2.152854] Console: switching to colour frame buffer device 128x48
[ 2.166337] fb0: VESA VGA frame buffer device
[ 2.166467] GHES: HEST is not enabled!
[ 2.166611] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.187281] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.187782] Linux agpgart interface v0.103
[ 2.189101] brd: module loaded
[ 2.189296] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.192143] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.192307] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.192521] mousedev: PS/2 mouse device common for all mice
[ 2.192758] rtc_cmos 00:06: RTC can wake from S4
[ 2.193030] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.193225] rtc_cmos 00:06: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 2.193432] cpuidle: using governor ladder
[ 2.193537] cpuidle: using governor menu
[ 2.193641] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.193875] TCP: cubic registered
[ 2.193963] Key type dns_resolver registered
[ 2.194302] PM: Checking hibernation image partition /dev/sda5
[ 2.216133] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.630082] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 3.122770] tsc: Refined TSC clocksource calibration: 3616.446 MHz
[ 3.122931] Switching to clocksource tsc
[ 3.424706] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1
[ 3.433015] PM: Hibernation image not present or could not be loaded.
[ 3.433025] registered taskstats version 1
[ 3.438657] Magic number: 9:886:539
[ 3.443930] rtc_cmos 00:06: setting system clock to 2013-12-09 16:30:46 UTC (1386606646)
[ 3.449294] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.454681] EDD information not available.
[ 3.460872] Freeing unused kernel memory: 1208k freed
[ 3.466447] Write protecting the kernel read-only data: 12288k
[ 3.476128] Freeing unused kernel memory: 1904k freed
[ 3.484560] Freeing unused kernel memory: 1200k freed
[ 3.510598] dracut: dracut-EE 2012.1 Desktop dracut-027-
[ 3.535782] device-mapper: uevent: version 1.0.3
[ 3.541159] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[ 3.549701] systemd-udevd[147]: starting version 204
[ 3.565654] [drm] Initialized drm 1.1.0 20060810
[ 3.573857] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 3.579533] ACPI: Power Button [PWRB]
[ 3.585168] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.590973] ACPI: Power Button [PWRF]
[ 3.597234] wmi: Mapper loaded
[ 3.605961] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 3.605964] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 3.611913] Console: switching to colour dummy device 80x25
[ 3.611998] nouveau 0000:00:0d.0: setting latency timer to 64
[ 3.612266] ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 21
[ 3.612456] nouveau [ DEVICE][0000:00:0d.0] BOOT0 : 0x04c000a2
[ 3.612462] nouveau [ DEVICE][0000:00:0d.0] Chipset: C61 (NV4C)
[ 3.612467] nouveau [ DEVICE][0000:00:0d.0] Family : NV40
[ 3.613255] nouveau [ VBIOS][0000:00:0d.0] checking PRAMIN for image...
[ 3.652414] nouveau [ VBIOS][0000:00:0d.0] ... appears to be valid
[ 3.652420] nouveau [ VBIOS][0000:00:0d.0] using image from PRAMIN
[ 3.652523] nouveau [ VBIOS][0000:00:0d.0] BIT signature found
[ 3.652529] nouveau [ VBIOS][0000:00:0d.0] version 05.61.32.28.01
[ 3.652644] nouveau [ PFB][0000:00:0d.0] RAM type: unknown
[ 3.652649] nouveau [ PFB][0000:00:0d.0] RAM size: 256 MiB
[ 3.652654] nouveau [ PFB][0000:00:0d.0] ZCOMP: 0 tags
[ 3.678376] nouveau [ PTHERM][0000:00:0d.0] FAN control: none / external
[ 3.678391] nouveau [ PTHERM][0000:00:0d.0] fan management: disabled
[ 3.678397] nouveau [ PTHERM][0000:00:0d.0] internal sensor: no
[ 3.698453] [TTM] Zone kernel: Available graphics memory: 1887854 kiB
[ 3.698459] [TTM] Initializing pool allocator
[ 3.698465] [TTM] Initializing DMA pool allocator
[ 3.704844] nouveau [ DRM] VRAM: 253 MiB
[ 3.704852] nouveau [ DRM] GART: 512 MiB
[ 3.704859] nouveau [ DRM] TMDS table version 1.1
[ 3.704864] nouveau [ DRM] DCB version 3.0
[ 3.704869] nouveau [ DRM] DCB outp 00: 01000310 00000023
[ 3.704874] nouveau [ DRM] DCB outp 01: 00110204 942b0003
[ 3.704880] nouveau [ DRM] DCB conn 00: 0000
[ 3.704885] nouveau [ DRM] DCB conn 01: 1131
[ 3.704890] nouveau [ DRM] DCB conn 02: 0110
[ 3.704895] nouveau [ DRM] DCB conn 03: 0111
[ 3.704899] nouveau [ DRM] DCB conn 04: 0113
[ 3.705096] nouveau W[ DRM] DCB type 4 not known
[ 3.705101] nouveau W[ DRM] Unknown-1 has no encoders, removing
[ 3.706365] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.706370] [drm] No driver support for vblank timestamp query.
[ 3.707248] nouveau [ DRM] 1 available performance level(s)
[ 3.707254] nouveau [ DRM] 0: core 425MHz shader 425MHz fanspeed 100%
[ 3.707260] nouveau [ DRM] c:
[ 3.708457] nouveau [ DRM] MM: using M2MF for buffer copies
[ 3.757433] nouveau [ DRM] allocated 1280x1024 fb: 0x9000, bo ffff880124e1ec00
[ 3.757493] fbcon: nouveaufb (fb0) is primary device
[ 3.818761] Console: switching to colour frame buffer device 160x64
[ 3.821049] nouveau 0000:00:0d.0: fb0: nouveaufb frame buffer device
[ 3.821059] nouveau 0000:00:0d.0: registered panic notifier
[ 3.821071] [drm] Initialized nouveau 1.1.1 20120801 for 0000:00:0d.0 on minor 0
[ 3.822320] dracut: Starting plymouth daemon
[ 5.136722] dracut: rd.md=0: removing MD RAID activation
[ 5.167982] ACPI: bus type USB registered
[ 5.168015] usbcore: registered new interface driver usbfs
[ 5.168024] usbcore: registered new interface driver hub
[ 5.168062] usbcore: registered new device driver usb
[ 5.168316] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.168448] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 5.168451] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 5.168456] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 5.168483] ohci_hcd 0000:00:02.0: irq 23, io mem 0xefeff000
[ 5.168773] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.168777] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 5.168915] ehci-pci: EHCI PCI platform driver
[ 5.220676] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.220680] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.220683] usb usb1: Product: OHCI Host Controller
[ 5.220684] usb usb1: Manufacturer: Linux 3.10.19-nrj-desktop-2rosa ohci_hcd
[ 5.220686] usb usb1: SerialNumber: 0000:00:02.0
[ 5.220794] hub 1-0:1.0: USB hub found
[ 5.220799] hub 1-0:1.0: 10 ports detected
[ 5.221058] ehci-pci 0000:00:02.1: setting latency timer to 64
[ 5.221235] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 5.221242] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 5.221251] ehci-pci 0000:00:02.1: debug port 1
[ 5.221269] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[ 5.221286] ehci-pci 0000:00:02.1: irq 22, io mem 0xefefec00
[ 5.226645] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 5.226661] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.226663] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.226665] usb usb2: Product: EHCI Host Controller
[ 5.226666] usb usb2: Manufacturer: Linux 3.10.19-nrj-desktop-2rosa ehci_hcd
[ 5.226668] usb usb2: SerialNumber: 0000:00:02.1
[ 5.226756] hub 2-0:1.0: USB hub found
[ 5.226761] hub 2-0:1.0: 10 ports detected
[ 5.275648] hub 1-0:1.0: USB hub found
[ 5.275654] hub 1-0:1.0: 10 ports detected
[ 5.275771] pata_amd 0000:00:06.0: version 0.4.1
[ 5.275805] pata_amd 0000:00:06.0: setting latency timer to 64
[ 5.276027] scsi0 : pata_amd
[ 5.276536] scsi1 : pata_amd
[ 5.276822] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 5.276824] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 5.276860] sata_nv 0000:00:08.0: version 3.5
[ 5.277165] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[ 5.277198] sata_nv 0000:00:08.0: setting latency timer to 64
[ 5.277365] scsi2 : sata_nv
[ 5.277441] scsi3 : sata_nv
[ 5.277492] ata3: SATA max UDMA/133 cmd 0xe080 ctl 0xe000 bmdma 0xd800 irq 20
[ 5.277494] ata4: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd808 irq 20
[ 5.277758] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
[ 5.277778] sata_nv 0000:00:08.1: setting latency timer to 64
[ 5.277931] scsi4 : sata_nv
[ 5.277999] scsi5 : sata_nv
[ 5.278048] ata5: SATA max UDMA/133 cmd 0xd480 ctl 0xd400 bmdma 0xcc00 irq 23
[ 5.278050] ata6: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xcc08 irq 23
[ 5.446812] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33
[ 5.446818] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
[ 5.468731] ata1.00: configured for UDMA/33
[ 5.474464] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H10N JL10 PQ: 0 ANSI: 5
[ 5.474622] ata2: port disabled--ignoring
[ 5.591851] ata5: SATA link down (SStatus 0 SControl 300)
[ 5.730394] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.733657] ata3.00: ATA-7: Hitachi HDS721612PLA380, P23OABEA, max UDMA/133
[ 5.733660] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 5.739658] ata3.00: configured for UDMA/133
[ 5.739732] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72161 P23O PQ: 0 ANSI: 5
[ 5.739861] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 5.739946] sd 2:0:0:0: [sda] Write Protect is off
[ 5.739949] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.739975] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.773846] sda: sda1 sda2 < sda5 > sda3
[ 5.774201] sd 2:0:0:0: [sda] Attached SCSI disk
[ 5.780350] usb 2-4: new high-speed USB device number 3 using ehci-pci
[ 5.913558] usb 2-4: New USB device found, idVendor=0ac8, idProduct=3450
[ 5.913562] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.913564] usb 2-4: Product: A4 TECH USB2.0 PC Camera E
[ 5.913565] usb 2-4: Manufacturer: A4 TECH Corp.
[ 6.052609] ata4: SATA link down (SStatus 0 SControl 300)
[ 6.175135] usb 1-2: new full-speed USB device number 2 using ohci_hcd
[ 6.365439] ata6: SATA link down (SStatus 0 SControl 300)
[ 6.367054] Uniform Multi-Platform E-IDE driver
[ 6.374765] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.374768] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.374937] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 6.376045] usb 1-2: New USB device found, idVendor=12d1, idProduct=1446
[ 6.376048] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 6.376050] usb 1-2: Product: HUAWEI Mobile
[ 6.376052] usb 1-2: Manufacturer: HUAÿWEI TECHNOLOGIES
[ 6.376054] usb 1-2: SerialNumber: ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
[ 6.379967] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 6.380040] scsi6 : usb-storage 1-2:1.0
[ 6.380103] usbcore: registered new interface driver usb-storage
[ 6.787828] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ 6.787832] PM: Marking nosave pages: [mem 0xbffa0000-0xffffffff]
[ 6.788343] PM: Marking nosave pages: [mem 0xb4000000-0xb7ffffff]
[ 6.788625] PM: Basic memory bitmaps created
[ 6.815672] PM: Basic memory bitmaps freed
[ 6.818110] PM: Starting manual resume from disk
[ 6.818113] PM: Hibernation image partition 8:5 present
[ 6.818115] PM: Looking for hibernation image.
[ 6.858946] PM: Image not found (code -22)
[ 6.858948] PM: Hibernation image not present or could not be loaded.
[ 6.883750] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.960999] dracut: Checking ext4: /dev/disk/by-uuid/77ff1831-4695-4cb4-8617-0e77ed1f6fff
[ 6.961037] dracut: issuing e2fsck -a /dev/disk/by-uuid/77ff1831-4695-4cb4-8617-0e77ed1f6fff
[ 7.041952] dracut: /dev/disk/by-uuid/77ff1831-4695-4cb4-8617-0e77ed1f6fff: clean, 136765/1925120 files, 1393742/7686279 blocks
[ 7.042975] dracut: Mounting /dev/disk/by-uuid/77ff1831-4695-4cb4-8617-0e77ed1f6fff with -o defaults,ro
[ 7.108836] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.234822] dracut: Mounted root filesystem /dev/sda1
[ 7.391518] scsi 6:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 0
[ 7.396069] dracut: Switching root
[ 7.429497] sr1: scsi-1 drive
[ 7.429600] sr 6:0:0:0: Attached scsi CD-ROM sr1
[ 7.851695] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 7.967254] systemd[1]: Inserted module 'autofs4'
[ 8.015451] NET: Registered protocol family 10
[ 8.015633] systemd[1]: Inserted module 'ipv6'
[ 8.021316] systemd[1]: Set hostname to <user-desktop>.
[ 8.657262] systemd[1]: Starting RPC Port Mapper.
[ 8.657329] systemd[1]: Reached target RPC Port Mapper.
[ 8.657339] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 8.657390] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 8.657399] systemd[1]: Starting Syslog Socket.
[ 8.657468] systemd[1]: Listening on Syslog Socket.
[ 8.657477] systemd[1]: Starting Delayed Shutdown Socket.
[ 8.657532] systemd[1]: Listening on Delayed Shutdown Socket.
[ 8.657540] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 8.657596] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 8.657603] systemd[1]: Starting Encrypted Volumes.
[ 8.657650] systemd[1]: Reached target Encrypted Volumes.
[ 8.657668] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 8.657782] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 8.657792] systemd[1]: Starting Journal Socket.
[ 8.657869] systemd[1]: Listening on Journal Socket.
[ 8.662196] systemd[1]: Starting Load legacy module configuration...
[ 8.662722] systemd[1]: Starting Create static device nodes in /dev...
[ 8.663122] systemd[1]: Starting Setup Virtual Console...
[ 8.663509] systemd[1]: Mounting POSIX Message Queue File System...
[ 8.699770] systemd[1]: Started Set Up Additional Binary Formats.
[ 8.699789] systemd[1]: Starting Set default kernel console loglevel...
[ 8.718555] systemd[1]: Starting Apply Kernel Variables...
[ 8.719008] systemd[1]: Starting Journal Service...
[ 8.719499] systemd[1]: Started Journal Service.
[ 8.719694] systemd[1]: Mounting Huge Pages File System...
[ 8.720123] systemd[1]: Mounting Debug File System...
[ 8.727719] systemd[1]: Starting Load Kernel Modules...
[ 8.728158] systemd[1]: Expecting device dev-disk-by\x2duuid-cb9c27c2\x2dd02a\x2d4c0e\x2da5f5\x2d28610fe76087.device...
[ 8.728213] systemd[1]: Starting udev Kernel Socket.
[ 8.728246] systemd[1]: Listening on udev Kernel Socket.
[ 8.728290] systemd[1]: Starting udev Control Socket.
[ 8.728321] systemd[1]: Listening on udev Control Socket.
[ 8.728361] systemd[1]: Starting udev Coldplug all Devices...
[ 8.728754] systemd[1]: Starting Configure read-only root support...
[ 8.729157] systemd[1]: Mounting Temporary Directory...
[ 8.742576] systemd[1]: Started File System Check on Root Device.
[ 8.742593] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 8.743014] systemd[1]: Expecting device dev-disk-by\x2duuid-eb168a1d\x2d0e80\x2d4f9f\x2d84df\x2d20b184e063d5.device...
[ 9.382206] systemd-journald[404]: Failed to resolve 'systemd-journal' group: No such process
[ 9.382464] systemd-journald[404]: Vacuuming done, freed 0 bytes
[ 9.483145] vboxguest: PCI device not found, probably running on physical hardware.
[ 9.530740] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 9.584464] systemd-udevd[454]: starting version 204
[ 10.171255] ACPI: acpi_idle registered with cpuidle
[ 10.342332] parport_pc 00:03: reported by Plug and Play ACPI
[ 10.342382] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 10.738351] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 10.738358] hda_intel: Disabling MSI
[ 10.738380] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[ 10.738383] hda-intel 0000:00:05.0: Disabling 64bit DMA
[ 10.742673] hda-intel 0000:00:05.0: Enable delay in RIRB handling
[ 10.911849] microcode: CPU0: patch_level=0x06000623
[ 10.938895] microcode: CPU0: new patch_level=0x0600063d
[ 10.938916] microcode: CPU1: patch_level=0x06000623
[ 10.938925] microcode: CPU2: patch_level=0x06000623
[ 10.951277] microcode: CPU2: new patch_level=0x0600063d
[ 10.951283] microcode: CPU3: patch_level=0x06000623
[ 10.951332] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 10.978878] kvm: Nested Virtualization enabled
[ 10.978882] kvm: Nested Paging enabled
[ 10.997264] acpi-cpufreq: overriding BIOS provided _PSD data
[ 11.062543] autoconfig: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
[ 11.062552] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.062556] hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 11.062560] mono: mono_out=0x0
[ 11.062563] inputs:
[ 11.062567] Rear Mic=0x1a
[ 11.062571] Front Mic=0x1e
[ 11.062575] Line=0x1b
[ 11.062578] CD=0x1f
[ 11.137103] EDAC MC: Ver: 3.0.0
[ 11.146321] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 11.163419] AMD64 EDAC driver v3.4.0
[ 11.279916] media: Linux media interface: v0.10
[ 11.307558] Linux video capture interface: v2.00
[ 11.323501] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input4
[ 11.323599] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input5
[ 11.323681] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
[ 11.324415] fam15h_power 0000:00:18.4: Bogus value for ProcessorPwrWatts (processor_pwr_watts>=19647)
[ 11.325956] i2c i2c-4: nForce2 SMBus adapter at 0x600
[ 11.325962] ACPI Warning: 0x0000000000000700-0x000000000000073f SystemIO conflicts with Region \_SB_.PCI0.SM00 1 (20130328/utaddress-251)
[ 11.325969] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.326145] EDAC amd64: DRAM ECC disabled.
[ 11.326153] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 11.401274] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[ 11.401635] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
[ 11.401652] saa7134[0]: found at 0000:01:0a.0, rev: 1, irq: 19, latency: 32, mmio: 0xeffffc00
[ 11.401658] saa7134[0]: subsystem: 5168:0138, board: LifeView FlyVIDEO3000 [card=2,autodetected]
[ 11.401671] saa7134[0]: board init: gpio is 39000
[ 11.401673] saa7134[0]: there are different flyvideo cards with different tuners
saa7134[0]: out there, you might have to use the tuner=<nr> insmod
saa7134[0]: option to override the default value.
[ 11.448340] Registered IR keymap rc-flyvideo
[ 11.448416] input: saa7134 IR (LifeView FlyVIDEO30 as /devices/pci0000:00/0000:00:04.0/0000:01:0a.0/rc/rc0/input7
[ 11.448716] rc0: saa7134 IR (LifeView FlyVIDEO30 as /devices/pci0000:00/0000:00:04.0/0000:01:0a.0/rc/rc0
[ 11.503413] ppdev: user-space parallel port driver
[ 11.588272] saa7134[0]: i2c eeprom 00: 68 51 38 01 10 28 ff ff ff ff ff ff ff ff ff ff
[ 11.588292] saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 11.588308] saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 11.588323] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 11.588337] saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 11.588352] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 11.588366] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 11.588381] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 11.588395] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 11.588410] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 11.588424] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 11.588439] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 11.588453] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 11.588468] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 11.588482] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 11.588496] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 11.821211] tuner 5-0061: Tuner -1 found with type(s) Radio TV.
[ 12.146353] uvcvideo: Found UVC 1.00 device A4 TECH USB2.0 PC Camera E (0ac8:3450)
[ 12.148353] input: A4 TECH USB2.0 PC Camera E as /devices/pci0000:00/0000:00:02.1/usb2/2-4/2-4:1.0/input/input8
[ 12.148535] usbcore: registered new interface driver uvcvideo
[ 12.148541] USB Video Class driver (1.1.1)
[ 12.188650] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.212919] tuner-simple 5-0061: creating new instance
[ 12.212925] tuner-simple 5-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[ 12.219116] saa7134[0]: registered device video1 [v4l2]
[ 12.219167] saa7134[0]: registered device vbi0
[ 12.219214] saa7134[0]: registered device radio0
[ 12.244281] saa7134 ALSA driver for DMA sound loaded
[ 12.244313] saa7134[0]/alsa: saa7134[0] at 0xeffffc00 irq 19 registered as card -1
[ 12.847061] usb 1-2: USB disconnect, device number 2
[ 12.978050] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 13.172867] Adding 3912700k swap on /dev/sda5. Priority:-1 extents:1 across:3912700k FS
[ 13.328171] systemd-journald[404]: Received request to flush runtime journal from PID 1
[ 17.171281] usb 1-2: new full-speed USB device number 3 using ohci_hcd
[ 17.362290] usb 1-2: New USB device found, idVendor=12d1, idProduct=140c
[ 17.362299] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 17.362304] usb 1-2: Product: HUAWEI Mobile
[ 17.362309] usb 1-2: Manufacturer: HUAÿWEI TECHNOLOGIES
[ 17.362313] usb 1-2: SerialNumber: ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
[ 17.368327] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 17.371334] usb-storage 1-2:1.1: USB Mass Storage device detected
[ 17.374325] usb-storage 1-2:1.2: USB Mass Storage device detected
[ 17.377334] usb-storage 1-2:1.3: USB Mass Storage device detected
[ 17.377571] usb-storage 1-2:1.4: USB Mass Storage device detected
[ 17.380349] scsi11 : usb-storage 1-2:1.4
[ 18.144449] usbcore: registered new interface driver usbserial
[ 18.144735] usbcore: registered new interface driver usbserial_generic
[ 18.144985] usbserial: USB Serial support registered for generic
[ 18.155197] usbcore: registered new interface driver option
[ 18.155210] usbserial: USB Serial support registered for GSM modem (1-port)
[ 18.155296] option 1-2:1.0: GSM modem (1-port) converter detected
[ 18.155376] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0
[ 18.155406] option 1-2:1.2: GSM modem (1-port) converter detected
[ 18.155461] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB1
[ 18.155479] option 1-2:1.3: GSM modem (1-port) converter detected
[ 18.155532] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB2
[ 18.178296] usbcore: registered new interface driver cdc_wdm
[ 18.183900] qmi_wwan 1-2:1.1: cdc-wdm0: USB WDM device
[ 18.184043] qmi_wwan 1-2:1.1 wwan0: register 'qmi_wwan' at usb-0000:00:02.0-2, WWAN/QMI device, 72:6d:ed:40:d4:3d
[ 18.184323] usbcore: registered new interface driver qmi_wwan
[ 18.388851] scsi 11:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 0
[ 18.433746] sr1: scsi-1 drive
[ 18.434012] sr 11:0:0:0: Attached scsi CD-ROM sr1
[ 18.457739] scsi 11:0:0:1: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 18.615646] sd 11:0:0:1: [sdb] Attached SCSI removable disk
[ 20.614303] nouveau E[ PBUS][0000:00:0d.0] MMIO write of 0x00a40001 FAULT at 0x00b000
[ 20.959155] Bluetooth: Core ver 2.16
[ 20.959173] NET: Registered protocol family 31
[ 20.959175] Bluetooth: HCI device and connection manager initialized
[ 20.959182] Bluetooth: HCI socket layer initialized
[ 20.959184] Bluetooth: L2CAP socket layer initialized
[ 20.959189] Bluetooth: SCO socket layer initialized
[ 21.576073] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.576080] Bluetooth: BNEP filters: protocol multicast
[ 21.576094] Bluetooth: BNEP socket layer initialized
[ 52.255792] tun: Universal TUN/TAP device driver, 1.6
[ 52.255796] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>