Проблема с изменением разрешения экрана.

[RomanV]

Здравствуйте, нужна помощь! Проблема заключается в следующем: при изменения разрешения экрана, ноутбук как бы сам выкидывает меня из системы и предлагает залогиниться (Настройки, которые я выбрал, не сохраняются).Пробывал изменять различными способами:

1.Через консоль вводил что-то типо этого xrander -s 1280x800 (До недавних обновлений всё работало).

2.Через "Настройки Рабочего стола"=>"Экран"(Эффект тот же самый).

3.Через "Настройки Рабочего стола"=>"Утилита настройки оборудования"(Получилось изменить разрешение, но ноутбук всё равно выкинул меня из системы, причём в этот раз я просто не смог залогиниться. Пришлось переустанавливать OC).

P.S:Решение проблемы найти не смог. Установлена Rosa fresh R2.

[akdengi]

Отдыхающие телепаты передают привет и хотят узнать lscpi вашего ноутбука, а также вывод xrandr

[RomanV]

Вот вывод xrandr:

Screen 0: minimum 320 x 200, current 1280 x 800, maximum 32767 x 32767
LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 304mm x 190mm
1280x800 60.0*+ 60.0*
1280x800_60 60.0
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 disconnected (normal left inverted right x axis y axis)
DVI1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)

И вывод lspci:

[roma@roma-ThinkPad-T61 ~]$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c)
00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit Network Connection (rev 03)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M-E) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
03:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)

[akdengi]

Пытаетесь разрешение поставить в KDE?

И нужен еще вывод ls /var/log/Xorg.0.log желательно после сбоя, а также /var/log/syslog

[RomanV]

Пытаетесь разрешение поставить в KDE?

Ну да. Разрешение стоящее по-умолчанию(1280х800) меня устраивает. Просто при смене на более низкое происходит то, что я уже описывал.

Через консоль получить вывод, у меня не получается. Вот из файла Xorg.0.log(Место после сбоя, я не смог найти):

[ 4613.757]
X.Org X Server 1.14.4
Release Date: 2013-10-31
[ 4613.757] X Protocol Version 11, Revision 0
[ 4613.757] Build Operating System: Linux_3.11.0-9-generic mandriva
[ 4613.757] Current Operating System: Linux roma-ThinkPad-T61 3.10.19-nrj-desktop-2rosa #1 SMP PREEMPT Wed Nov 27 12:49:16 UTC 2013 i686
[ 4613.757] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10.19-nrj-desktop-2rosa root=UUID=f236ece5-d839-4cfb-9a67-e51b036fbfda ro splash=silent logo.nologo resume=/dev/sda1 init=/lib/systemd/systemd
[ 4613.757] Build Date: 08 November 2013 01:36:30PM
[ 4613.757]
[ 4613.758] Current version of pixman: 0.30.2
[ 4613.758] Before reporting problems, check http://bugs.rosalinux.ru/
to make sure that you have the latest version.
[ 4613.758] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4613.758] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 10 00:12:50 2013
[ 4613.758] (==) Using config file: "/etc/X11/xorg.conf"
[ 4613.758] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4613.758] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4613.758] (==) ServerLayout "layout1"
[ 4613.758] (**) |-->Screen "screen1" (0)
[ 4613.758] (**) | |-->Monitor "monitor1"
[ 4613.759] (**) | |-->Device "device1"
[ 4613.759] (**) Option "DontZap" "False"
[ 4613.759] (**) Option "AllowMouseOpenFail"
[ 4613.759] (==) Automatically adding devices
[ 4613.759] (==) Automatically enabling devices
[ 4613.759] (==) Automatically adding GPU devices
[ 4613.759] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d
[ 4613.759] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 4613.759] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4613.759] (II) Loader magic: 0x8287620
[ 4613.759] (II) Module ABI versions:
[ 4613.759] X.Org ANSI C Emulation: 0.4
[ 4613.759] X.Org Video Driver: 14.1
[ 4613.759] X.Org XInput driver : 19.1
[ 4613.759] X.Org Server Extension : 7.0
[ 4613.759] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4613.763] (--) PCI:*(0:0:2:0) 8086:2a02:17aa:20b5 rev 12, Mem @ 0xf8100000/1048576, 0xe0000000/268435456, I/O @ 0x00001800/8
[ 4613.763] (--) PCI: (0:0:2:1) 8086:2a03:17aa:20b5 rev 12, Mem @ 0xf8200000/1048576
[ 4613.765] (II) Open ACPI successful (/var/run/acpid.socket)
[ 4613.765] Initializing built-in extension Generic Event Extension
[ 4613.765] Initializing built-in extension SHAPE
[ 4613.765] Initializing built-in extension MIT-SHM
[ 4613.765] Initializing built-in extension XInputExtension
[ 4613.765] Initializing built-in extension XTEST
[ 4613.765] Initializing built-in extension BIG-REQUESTS
[ 4613.765] Initializing built-in extension SYNC
[ 4613.765] Initializing built-in extension XKEYBOARD
[ 4613.765] Initializing built-in extension XC-MISC
[ 4613.765] Initializing built-in extension SECURITY
[ 4613.765] Initializing built-in extension XINERAMA
[ 4613.765] Initializing built-in extension XFIXES
[ 4613.765] Initializing built-in extension XFree86-Bigfont
[ 4613.765] Initializing built-in extension RENDER
[ 4613.765] Initializing built-in extension RANDR
[ 4613.765] Initializing built-in extension COMPOSITE
[ 4613.765] Initializing built-in extension DAMAGE
[ 4613.765] Initializing built-in extension MIT-SCREEN-SAVER
[ 4613.765] Initializing built-in extension DOUBLE-BUFFER
[ 4613.765] Initializing built-in extension RECORD
[ 4613.766] Initializing built-in extension DPMS
[ 4613.767] Initializing built-in extension X-Resource
[ 4613.767] Initializing built-in extension XVideo
[ 4613.767] Initializing built-in extension XVideo-MotionCompensation
[ 4613.767] Initializing built-in extension XFree86-VidModeExtension
[ 4613.767] Initializing built-in extension XFree86-DGA
[ 4613.767] Initializing built-in extension XFree86-DRI
[ 4613.767] Initializing built-in extension DRI2
[ 4613.767] (II) "glx" will be loaded by default.
[ 4613.767] (II) LoadModule: "v4l"
[ 4613.767] (II) Loading /usr/lib/xorg/modules/drivers/v4l_drv.so
[ 4613.767] (II) Module v4l: vendor="X.Org Foundation"
[ 4613.767] compiled for 1.14.4, module version = 0.1.1
[ 4613.767] ABI class: X.Org Video Driver, version 14.1
[ 4613.767] (II) LoadModule: "glx"
[ 4613.768] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4613.768] (II) Module glx: vendor="X.Org Foundation"
[ 4613.768] compiled for 1.14.4, module version = 1.0.0
[ 4613.768] ABI class: X.Org Server Extension, version 7.0
[ 4613.768] (==) AIGLX enabled
[ 4613.768] Loading extension GLX
[ 4613.768] (II) LoadModule: "intel"
[ 4613.768] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4613.770] (II) Module intel: vendor="X.Org Foundation"
[ 4613.770] compiled for 1.14.4, module version = 2.99.905
[ 4613.770] Module class: X.Org Video Driver
[ 4613.770] ABI class: X.Org Video Driver, version 14.1
[ 4613.770] (II) v4l driver for Video4Linux
[ 4613.770] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 4613.771] (++) using VT number 1

[ 4613.771] (WW) Falling back to old probe method for v4l
[ 4613.773] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 4613.773] (==) intel(0): RGB weight 888
[ 4613.773] (==) intel(0): Default visual is TrueColor
[ 4613.773] (--) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
[ 4613.773] (--) intel(0): CPU: x86, sse2, sse3, ssse3
[ 4613.773] (**) intel(0): Framebuffer tiled
[ 4613.773] (**) intel(0): Pixmaps tiled
[ 4613.773] (**) intel(0): "Tear free" disabled
[ 4613.773] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 4613.773] (II) intel(0): Output LVDS1 using monitor section monitor1
[ 4613.773] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 4613.774] (II) intel(0): Output VGA1 has no monitor section
[ 4613.774] (II) intel(0): Output DVI1 has no monitor section
[ 4613.774] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 4613.774] (--) intel(0): Output LVDS1 using initial mode 1280x800 on pipe 0
[ 4613.774] (==) intel(0): DPI set to (96, 96)
[ 4613.774] (II) Loading sub module "dri2"
[ 4613.774] (II) LoadModule: "dri2"
[ 4613.774] (II) Module "dri2" already built-in
[ 4613.774] (==) Depth 24 pixmap format is 32 bpp
[ 4613.774] (II) intel(0): SNA initialized with Broadwater (gen4) backend
[ 4613.774] (==) intel(0): Backing store disabled
[ 4613.774] (==) intel(0): Silken mouse enabled
[ 4613.774] (II) intel(0): HW Cursor enabled
[ 4613.774] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 4613.775] (**) intel(0): DPMS enabled
[ 4613.775] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[ 4613.775] (II) intel(0): [DRI2] Setup complete
[ 4613.775] (II) intel(0): [DRI2] DRI driver: i965
[ 4613.775] (II) intel(0): direct rendering: DRI2 Enabled
[ 4613.775] (==) intel(0): hotplug detection: "enabled"
[ 4613.775] (--) RandR disabled
[ 4613.806] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 4613.806] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 4613.806] (II) AIGLX: enabled GLX_ARB_create_context
[ 4613.806] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 4613.806] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 4613.806] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 4613.806] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 4613.806] (II) AIGLX: Loaded and initialized i965
[ 4613.806] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 4613.813] (II) intel(0): switch to mode 1280x800@60.0 on pipe 0 using LVDS1, position (0, 0), rotation normal
[ 4613.819] (II) intel(0): Setting screen physical size to 338 x 211
[ 4613.909] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 4613.909] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4613.909] (**) Power Button: Applying InputClass "system-keyboard"
[ 4613.909] (II) LoadModule: "evdev"
[ 4613.910] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4613.910] (II) Module evdev: vendor="X.Org Foundation"
[ 4613.910] compiled for 1.14.4, module version = 2.8.2
[ 4613.910] Module class: X.Org XInput Driver
[ 4613.910] ABI class: X.Org XInput driver, version 19.1
[ 4613.910] (II) Using input driver 'evdev' for 'Power Button'
[ 4613.910] (**) Power Button: always reports core events
[ 4613.910] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 4613.910] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4613.910] (--) evdev: Power Button: Found keys
[ 4613.910] (II) evdev: Power Button: Configuring as keyboard
[ 4613.910] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 4613.910] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 4613.910] (**) Option "xkb_rules" "evdev"
[ 4613.910] (**) Option "xkb_model" "pc105"
[ 4613.910] (**) Option "xkb_layout" "us,ru"
[ 4613.910] (**) Option "xkb_options" "grp:lwin_toggle,grp_led:scroll,compose:rwin"
[ 4613.999] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 4613.999] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 4613.999] (**) Video Bus: Applying InputClass "system-keyboard"
[ 4613.999] (II) Using input driver 'evdev' for 'Video Bus'
[ 4613.999] (**) Video Bus: always reports core events
[ 4613.999] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 4613.999] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 4613.999] (--) evdev: Video Bus: Found keys
[ 4613.999] (II) evdev: Video Bus: Configuring as keyboard
[ 4613.999] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5"
[ 4613.999] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 4613.999] (**) Option "xkb_rules" "evdev"
[ 4613.999] (**) Option "xkb_model" "pc105"
[ 4613.999] (**) Option "xkb_layout" "us,ru"
[ 4613.999] (**) Option "xkb_options" "grp:lwin_toggle,grp_led:scroll,compose:rwin"
[ 4614.000] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 4614.000] (II) No input driver specified, ignoring this device.
[ 4614.000] (II) This device may have been added with another device file.
[ 4614.000] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 4614.000] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 4614.000] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 4614.000] (II) Using input driver 'evdev' for 'Sleep Button'
[ 4614.000] (**) Sleep Button: always reports core events
[ 4614.000] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 4614.000] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 4614.000] (--) evdev: Sleep Button: Found keys
[ 4614.000] (II) evdev: Sleep Button: Configuring as keyboard
[ 4614.000] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 4614.000] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id
[ 4614.000] (**) Option "xkb_rules" "evdev"
[ 4614.000] (**) Option "xkb_model" "pc105"
[ 4614.000] (**) Option "xkb_layout" "us,ru"
[ 4614.000] (**) Option "xkb_options" "grp:lwin_toggle,grp_led:scroll,compose:rwin"
[ 4614.001] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4614.022] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 4614.022] (II) No input driver specified, ignoring this device.
[ 4614.022] (II) This device may have been added with another device file.
[ 4614.027] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event8)
[ 4614.027] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 4614.027] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 4614.027] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 4614.027] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event8"
[ 4614.027] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc03e
[ 4614.027] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
[ 4614.027] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 4614.027] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 4614.027] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 4614.027] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 4614.027] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 4614.027] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 4614.027] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 4614.027] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0/input/input8/event8"
[ 4614.027] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 9)
[ 4614.033] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 4614.033] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 4614.033] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 4614.033] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 4614.033] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 4614.039] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse2)
[ 4614.039] (II) No input driver specified, ignoring this device.
[ 4614.039] (II) This device may have been added with another device file.
[ 4614.040] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 4614.040] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 4614.040] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 4614.040] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 4614.040] (**) AT Translated Set 2 keyboard: always reports core events
[ 4614.040] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 4614.040] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 4614.040] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 4614.040] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 4614.040] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 4614.040] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 4614.040] (**) Option "xkb_rules" "evdev"
[ 4614.040] (**) Option "xkb_model" "pc105"
[ 4614.040] (**) Option "xkb_layout" "us,ru"
[ 4614.040] (**) Option "xkb_options" "grp:lwin_toggle,grp_led:scroll,compose:rwin"
[ 4614.040] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[ 4614.040] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 4614.040] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 4614.059] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 4614.059] (II) LoadModule: "synaptics"
[ 4614.059] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 4614.059] (II) Module synaptics: vendor="X.Org Foundation"
[ 4614.059] compiled for 1.14.4, module version = 1.7.1
[ 4614.059] Module class: X.Org XInput Driver
[ 4614.059] ABI class: X.Org XInput driver, version 19.1
[ 4614.059] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 4614.059] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 4614.059] (**) Option "Device" "/dev/input/event1"
[ 4614.083] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 93)
[ 4614.083] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 125)
[ 4614.083] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 4614.083] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 4614.083] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 4614.083] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 4614.083] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 4614.083] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 4614.094] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input1/event1"
[ 4614.094] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 4614.094] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 4614.094] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 4614.094] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 4614.094] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 4614.094] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 4614.094] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 4614.094] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 4614.094] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 4614.094] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 4614.094] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 4614.095] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event6)
[ 4614.095] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 4614.095] (**) TPPS/2 IBM TrackPoint: Applying InputClass "trackpoint catchall"
[ 4614.095] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 4614.095] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 4614.095] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event6"
[ 4614.095] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 4614.095] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 4614.095] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 4614.095] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 4614.095] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 4614.095] (**) Option "Emulate3Buttons" "true"
[ 4614.095] (**) Option "EmulateWheel" "true"
[ 4614.095] (**) Option "EmulateWheelButton" "2"
[ 4614.095] (**) Option "YAxisMapping" "4 5"
[ 4614.095] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 4614.095] (**) Option "XAxisMapping" "6 7"
[ 4614.095] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
[ 4614.095] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 4614.095] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input6/event6"
[ 4614.095] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 12)
[ 4614.095] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 4614.095] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 4614.095] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 4614.095] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 4614.095] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 4614.096] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 4614.096] (II) No input driver specified, ignoring this device.
[ 4614.096] (II) This device may have been added with another device file.
[ 4614.096] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event7)
[ 4614.096] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 4614.096] (**) ThinkPad Extra Buttons: Applying InputClass "system-keyboard"
[ 4614.096] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 4614.096] (**) ThinkPad Extra Buttons: always reports core events
[ 4614.096] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event7"
[ 4614.096] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 4614.096] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 4614.096] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 4614.097] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input7/event7"
[ 4614.097] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
[ 4614.097] (**) Option "xkb_rules" "evdev"
[ 4614.097] (**) Option "xkb_model" "pc105"
[ 4614.097] (**) Option "xkb_layout" "us,ru"
[ 4614.097] (**) Option "xkb_options" "grp:lwin_toggle,grp_led:scroll,compose:rwin"
[ 4621.019] (II) intel(0): EDID vendor "LEN", prod id 16433
[ 4621.019] (II) intel(0): Printing DDC gathered Modelines:
[ 4621.019] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1405 800 803 809 822 -hsync -vsync (49.3 kHz eP)
[ 4621.019] (II) intel(0): Modeline "1280x800"x0.0 57.75 1280 1328 1360 1405 800 803 809 822 -hsync -vsync (41.1 kHz e)

Насчёт syslog, этот файл большой, он весь нужен?

[akdengi]

Можно попробовать загрузиться добавив в boot опции ядра в grub

i915.semaphores=1

[RomanV]

Можно попробовать загрузиться добавив в boot опции ядра в grub

i915.semaphores=1

А как именно мне это сделать? С помощью какой-нибудь команды в консоли?