Erreur gravure K3b!
Добавлено: 03 фев 2018, 16:15
Gerardll51
Bonjour,
K3b ne veut pas graver un CD.
Voilà ce que ça me dit (cliquer sur l'icône ci-dessous):
Avez-vous le même souci?
Faut que je mette les fichiers sur un CD car je ne pourrai pas mettre une clé sur le matériel que je vais utiliser.
K3b ne veut pas graver un CD.
Voilà ce que ça me dit (cliquer sur l'icône ci-dessous):
Devices
-----------------------
TSSTcorp CDDVDW SH-S223F SB00 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R séquentiel, DVD-R double couche séquentiel, DVD+R double couche avec saut, DVD-RAM, DVD-RW à ré-inscription limitée, DVD-RW séquentiel, DVD+RW, DVD+R, DVD+R double couche, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Ré-inscription restreinte, Saut de couche] [%7]
K3b::IsoImager
-----------------------
mkisofs print size result: 208513 (427034624 bytes)
System
-----------------------
K3b Version: 17.8.2
KDE Version: 5.38.0
Qt Version: 5.9.4
Kernel: 4.9.76-nrj-desktop-1rosa-x86_64
Used versions
-----------------------
mkisofs: 3.2a07
cdrecord: 3.2a07
cdrecord
-----------------------
cdrecord: Opération non permise. Warning: Cannot raise RLIMIT_MEMLOCK limits.
cdrecord: Ne peut allouer de la mémoire. WARNING: Cannot do mlockall(2).
cdrecord: WARNING: This causes a high risk for buffer underruns.
cdrecord: Opération non permise. WARNING: Cannot set RR-scheduler.
cdrecord: Permission non accordée. WARNING: Cannot set priority using setpriority().
cdrecord: WARNING: This causes a high risk for buffer underruns.
cdrecord: Insufficient 'file read' privileges. You will not be able to open all needed devices.
cdrecord: Insufficient 'file write' privileges. You will not be able to open all needed devices.
cdrecord: Insufficient 'device' privileges. You may not be able to send all needed SCSI commands, this my cause various unexplainable problems.
cdrecord: Insufficient 'memlock' privileges. You may get buffer underruns.
cdrecord: Insufficient 'priocntl' privileges. You may get buffer underruns.
cdrecord: Insufficient 'network' privileges. You will not be able to do remote SCSI.
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
SCSI buffer size: 64512
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
Cdrecord-ProDVD-ProBD-Clone 3.02a07 (x86_64-unknown-linux-gnu) Copyright (C) 1995-2016 Joerg Schilling
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'schily-0.9'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'TSSTcorp'
Identifikation : 'CDDVDW SH-S223F '
Revision : 'SB00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: CD-R
Profile: DVD-R/DL sequential recording
Profile: DVD-R/DL layer jump recording
Profile: DVD-RW/DL
Profile: DVD+R/DL
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-RW sequential recording
Profile: DVD-RW restricted overwrite
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R (current)
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1962752 = 1916 KB
FIFO size : 4194304 = 4096 KB
cdrecord: Opération non permise. rezero unit: scsi sendcmd: fatal error
CDB: 01 00 00 00 00 00
cdrecord: Opération non permise. Cannot send SCSI cmd via ioctl.
cdrecord: Opération non permise. Cannot open or use SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
Track 01: data 407 MB
Total size: 467 MB (46:20.20) = 208515 sectors
Lout start: 468 MB (46:22/15) = 208515 sectors
cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/sr0 speed=48 -tao driveropts=burnfree -multi -xa -tsize=208513s -
mkisofs
-----------------------
208513
mkisofs: Warning: Cannot add inode hints with -no-cache-inodes.
=== last message repeated 2 times. ===
Setting input-charset to 'UTF-8' from locale.
mkisofs calculate size command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -print-size -quiet -volid Francis Cabrel -volset -appid K3B THE CD KREATOR (C) 1998-2017 SEBASTIAN TRUEG, MICHAL MALEK AND LESLIE ZHAI -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/k3b.KK9454 -rational-rock -hide-list /tmp/k3b.Tu9454 -joliet -joliet-long -hide-joliet-list /tmp/k3b.BE9454 -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/k3b.EF9454
mkisofs command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid Francis Cabrel -volset -appid K3B THE CD KREATOR (C) 1998-2017 SEBASTIAN TRUEG, MICHAL MALEK AND LESLIE ZHAI -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/k3b.FR9454 -rational-rock -hide-list /tmp/k3b.Ob9454 -joliet -joliet-long -hide-joliet-list /tmp/k3b.oS9454 -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/k3b.Ei9454
Faut que je mette les fichiers sur un CD car je ne pourrai pas mettre une clé sur le matériel que je vais utiliser.