ROSA Forum

We finally have them in the x11-backports repositorties (http://forum.rosalab.ru/viewtopic.php?f=54&t=7475).

The driver should support all GPUs supported by the versions 343.x - 370.x as well as several more models, including but not limited to::

• GeForce GTX 1050
  GeForce GTX 1050 Ti
  Quadro M620
  Quadro M5000 SE
  Quadro P6000
  Quadro P5000
  Tesla P4
  Tesla P40

If you would like to try this version, it can be installed as follows.

Step 1: add x11-backports repositories if you haven't done that yet. See the link above for the instructions.

Step 2: either install all available software updates (urpmi --auto-update) or update ldetect-lst at least: Step 3: launch XFdrake ("Configure Graphics Card"). If the GPU is supported by the new driver, XFdrake will show the driver in the list of available options. For the systems with hybrid graphics, XFdrake should show the appropriate variants too. Select the driver and (recommended) leave the rest as defaults there.

Step 4: reboot the system.

As usual, please let us know if anything went worse or better with this driver version. Do not forget about hw-probe too (https://linux-hardware.org/index.php?view=howto).