Страница 1 из 1
ROSA 2012 Desktop Beta 1 USB key installation
Добавлено: 25 окт 2012, 18:53
ferri
I tried to boot ROSA 2012 Desktop Beta 1 from USB key without any success.
I used two ways:
- UNetbootin
- direct writing dd-if-of.
I have external DVD drive also. It boots Beta 1 without any problem.
But ROSA 2012 RP1 MARATHON EE boots from USB key without a problem.
Re: ROSA 2012 Desktop Beta 1 USB key installation
Добавлено: 25 окт 2012, 18:55
akdengi
ferri писал(а):I tried to boot ROSA 2012 Desktop Beta 1 from USB key without any success.
I used two ways:
- UNetbootin
- direct writing dd-if-of.
I have external DVD drive also. It boots Beta 1 without any problem.
But ROSA 2012 RP1 MARATHON EE boots from USB key without a problem.
Please see Errata and try use this ISO:
http://mirror.yandex.ru/rosa/rosa/rosa2 ... ktop.Beta/
Re: ROSA 2012 Desktop Beta 1 USB key installation
Добавлено: 25 окт 2012, 19:41
ferri
OK. I will try. First I must download.
And I have another issue.
I installed system into VMware Player virtual machine from installation image with date 24. 10. 2012.
But installed system refuses start. Restarting around.
It seems to me that Beta 1 has worse quality than Alpha 2.
Re: ROSA 2012 Desktop Beta 1 USB key installation
Добавлено: 25 окт 2012, 19:52
akdengi
ferri писал(а):
OK. I will try. First I must download.
And I have another issue.
I installed system into VMware Player virtual machine from installation image with date 24. 10. 2012.
But installed system refuses start. Restarting around.
It seems to me that Beta 1 has worse quality than Alpha 2.
May you put here output for /boot/grub2/grub.cfg from non-working VMware Player? May be some kernel line option break load.
And were is system restarted?
Re: ROSA 2012 Desktop Beta 1 USB key installation
Добавлено: 25 окт 2012, 20:14
sylvainsjc
Hello,
I also tried to install twice today Beta X86_64 behind VMWare Woirkstation 8
The installation process goes well but on reboot, I get a error "no device UUID xxxxxxxxxxxx" and ends with dracut

Re: ROSA 2012 Desktop Beta 1 USB key installation
Добавлено: 25 окт 2012, 20:30
ferri
akdengi писал(а):
May you put here output for /boot/grub2/grub.cfg from non-working VMware Player? May be some kernel line option break load.
And were is system restarted?
Bad luck.

I have already fired out iso image and not working virtual machine.
Re: ROSA 2012 Desktop Beta 1 USB key installation
Добавлено: 25 окт 2012, 20:40
akdengi
sylvainsjc писал(а):Hello,
I also tried to install twice today Beta X86_64 behind VMWare Woirkstation 8
The installation process goes well but on reboot, I get a error "no device UUID xxxxxxxxxxxx" and ends with dracut

It's may be same as non-bootable USB-flash. Will try renewed ISO.
Re: ROSA 2012 Desktop Beta 1 USB key installation
Добавлено: 25 окт 2012, 21:38
sylvainsjc
Another try this evening with ISO X86_64 on my own desktop (running 2012 marathon) and VirtualBox 4.1.22 : It works well
Other tests were made today with the same ISO, but downloaded again and with a PC under Windows Seven 64 and behind VMWare Workstation
Je re-tenterai demain avec l'ISO qui a fonctionné ce soir.
Re: ROSA 2012 Desktop Beta 1 USB key installation
Добавлено: 26 окт 2012, 17:50
ferri
This ISO (dated 17. 10. 2012 ) is usable for USB key booting without any problem.

Re: ROSA 2012 Desktop Beta 1 USB key installation
Добавлено: 26 окт 2012, 18:20
ferri
I again installed system into VMware Player virtual machine . This time I used image with date 17. 10. 2012.
System behaves equally like with image from 24. 10. 2012.
After setting hard display resolution for virtual machine, it stopped at this point.
Re: ROSA 2012 Desktop Beta 1 USB key installation
Добавлено: 26 окт 2012, 22:21
akdengi
Hi. We knew about problem and try investigate it. Thanks for report.
Re: ROSA 2012 Desktop Beta 1 USB key installation
Добавлено: 08 дек 2012, 19:04
ferri
ferri писал(а):I tried to boot ROSA 2012 Desktop Beta 1 from USB key without any success.
RC works without a problem from USB.
